Bộ Gậy Sắt I Blade AWT 2.0
Giá bán 31.015.000 vnđ
Hãng sản xuất PING
Tình trạng
Lượt xem 964 lượt
Ngày đăng 2017-06-12 10:55:13
Chia sẻ bài viết lên mạng xã hội

High-Speed Face

The thin face (half the thickness of the S55 iron) yields greater ball speeds for increased distance throughout the set with higher overall trajectories and precise control. A hydropearl chrome finish repels water for more control and helps minimize fliers from wet conditions and lies in the rough.

Activated Elastomer

The unprecedented feel is achieved through a combination of soft 431 stainless steel and a larger surface area behind the face that houses an elastomer insert. The insert is "activated" at impact, resulting in more vibration damping in your hands for a softer feel and pleasing sound.

Tungsten Weighting

Nearly "pure" tungsten toe weights (netting a 70% increase in mass relative to the S55 iron) are pressed into the toe of every head to increase MOI, a key factor in the precision of the iBlade iron.

Workable Sole

Refined bounce angles and ample heel relief, optimized with the same sole width as the S55 iron, produce a workable sole design for confident shot making from all conditions. Further precision comes from the milled tour-spec grooves and precision-machined fly-cut face.

Club Loft Length Offset Lie Bounce Width Swing Weight Dexterity
4-Iron 23.00° 38.50" 0.19" 60.38° 0.5" D2 RH/LH
5-Iron 26.00° 38.00" 0.17" 61.13° 0.6" D2 RH/LH
6-Iron 29.00° 37.50" 0.14" 61.88° 0.7" D2 RH/LH
7-Iron 32.00° 37.00" 0.09" 62.63° 0.8" D2 RH/LH
8-Iron 36.00° 36.50" 0.07" 63.38° 0.9" D2 RH/LH
9-Iron 41.00° 36.00" 0.05" 64.13° 1.05" D2.5 RH/LH
Pitching Wedge 45.00° 35.50" 0.03" 64.75° 1.2" D3 RH/LH